DR-60T Rawhide Bone Pressing Machine could produce pet bone with rawhide as raw materials.
1.It is type of Flour Column and Three Board, the upmost output tonnage can be adjustable.
2.It can be adjusted among the range of 5t-60t according to the different products’ procedures, the purpose is to arrive the best required output.
3.Well, our DR-60T Pressing Machine has two types, manual operation and automatic operation, meanwhile, it can count and timing automatically, safe and protective.
4.In addition, our DR-60T Pressing Machine’s middle plate and lower plate open two-article T-slot respectively, the pressure system is rear-mounted and the below equips with horizontal floor mat.
5.After pressing, the mold plate can be moved outside, so that it could well protect the operator’s safety.
6.Machine with good safety design. While the workers place the materials or take out the final product, the bottom mold can be moved outward, so the workers is not under the upper mold. Only after the worker leave the machine, the machine should be allowed to start by pressing the two palm buttons.
7.Equipped with PLC and touch screen to realize easy control. Different languages can be input as requirement (standard language is Chinese and English).
1）Darin is supplier of General Mills (a top 500 comanines in the world), Kelloggs, Melinda & Bill Gates foundation;
2) Darin is High-Tech enterprise of Shandong Province, 2019;
3) Darin is deputy director unit of Shandong Pets Industrial Association.
4) Motors are from WEG, which has 3-year world-wide guarantee or Siemens motor;
5) Electric parts are from ABB or Schneider, easy to find replacments at local market;
6) PLC and touch screen are from Siemens, Germany to realize easier operation and less labor quantity;
7) PLC and touch scrren controls whole processing line, not one or two single equipment;
8) While faults occurred, relevant information will be displayed on touch screen, easy to settle the problem;
9) Control cabinet has 24V safe voltage (not 220V), which could protect the operator even electric leakage occurred;
10) Three kinds of protectors to keep machine and operator safe: over-current protector, over-voltage protector and over-heat protector;
11) All the cover body, mesh belt and parts touching with materials or final products are made by stainless steel 304.
Working Surface Size
Left and Right 500mm
Working Surface Size
Front and Back 400mm
Height of Working Table to the Ground
Max.Stroke of Mobile Mould
5300 x 965 x 1850mm
1. Could we visit your factory to check the machine carefully and closely?
You’re more than welcome to visit Darin, we will provide machine test running, face to face discussioin and turkey project design solution.
2. Could you afford technician team to guide our installation and commissioning?
Oversea commssioning service provided, our technician will help to install the machine, and teach local workers about operation and manitenance. Buyer should pay for the technician’s round flight ticket , accommodation and salary.
3. How long is your machine’s guarantee time?
One year from the machine arrive at your factory.
4. If some parts break after warranty, what should we do?
Darin supply full-life after sales service, whenever new parts needed, we will help to supply new replacments at reasonable price & in shortest time.
5. If we show our workshop size, can you design layout for the whole line?
AutoCAD layout will be provided as client’s workshop size.
6. During epedemic period, how should we install the processing line without any experience?
1) Before delivery, we will take detailed operation video to show how to assemble each machine, how to operate and maintain the line.
2) Operation manual, circuit diagram etc in English version will be provided.
3) Online support available. If any questions during installation or production, our engineer will help to solve by videocall or zoom meeting.