Rawhide Bone Pressing Machine

Pet Food Extruding Line
Pet Food Extruding Line
Pet Treats Extruding Line
Pet Treats Extruding Line
DR-60T Rawhide Bone Pressing Machine could produce pet bone with rawhide as raw materials.
1.It is type of Flour Column and Three Board, the upmost output tonnage can be adjustable.
2.It can be adjusted among the range of 5t-60t according to the different products’ procedures, the purpose is to arrive the best required output.
3.Well, our DR-60T Pressing Machine has two types, manual operation and automatic operation, meanwhile, it can count and timing automatically, safe and protective.
4.In addition, our DR-60T Pressing Machine’s middle plate and lower plate open two-article T-slot respectively, the pressure system is rear-mounted and the below equips with horizontal floor mat.
5.After pressing, the mold plate can be moved outside, so that it could well protect the operator’s safety.
6.Machine with good safety design. While the workers place the materials or take out the final product, the bottom mold can be moved outward, so the workers is not under the upper mold. Only after the worker leave the machine, the machine should be allowed to start by pressing the two palm buttons.
7.Equipped with PLC and touch screen to realize easy control. Different languages can be input as requirement (standard language is Chinese and English).

Product figure

Technical parameters

Theory OutputMax. 60t
Working Surface SizeLeft and Right 500mm
Working Surface SizeFront and Back 400mm
Height of Working Table to the Ground780mm
Max. Stroke of Mobile Mould350mm
Motor Power9kw
Dimension2500 x 1200 x 1900mm

Device display